PUCH 250 SGS

Restoring a barn-fresh 1966 Sears Allstate

CVMG Paris Rally: 2015

Another Paris Rally, great weather – here’s a few pics of what caught my eye this year.

 

 

posted by Fastback in cool bikes,events/shows,Puch 250 SGS and have No Comments

New tires – old Puch

Original Semperit tire.

Original Semperit tire.

The original equipment Semperit tires on the ’66 Puch 250 SGS are getting a wee bit, well, tired. With my current push to get the old girl road legal I’ve ordered tires and checked the brake pads. Really, it’s time I showed the bike some love, especially after several years of being ridden hard and put away wet at Paris, literally.

I’ve ordered a pair of Duro HF319 from a local dealer, the tread pattern looks pretty vintage so they should look right.

DURO_HF-319

Part number : 113113

  • Designed as a general replacement tire
  • Excellent load carrying capabilities
  • Can be used as a front and rear tire
  • Excellent puncture resistance

I mean really, isn’t that the basic description of a tire?!

I will also look into getting a 16″ rim for the Velorex to lower the hack as it is currently wearing a 19″ – then perhaps I’ll need another Duro.

Sears Allstate Puch 175 60_57

click to enlarge

 

I came upon this page from a Sears catalogue a while back, it is a great illustration of the Puch badged as a Sears Allstate, although I think the illustrator didn’t understand how brake and clutch levers worked. I’m pretty intrigued by the brown sack outfit the guy on the left is wearing. Is that rain gear? 

 

 

 

 

posted by Fastback in mechanical,parts,Puch,restoration and have No Comments

Paris CVMG Rally – 2014

This year we decided to bring a plethora of bikes in a cubevan. We thought we were being smart and prepared but of course wrangling children, bikes and getting out of town on a Friday afternoon was a bit challenging.

We managed to stuff into a cube van the following:

  • 3 x Norton Commando
  • 1 x Honda Ascot
  • 1 x Puch with sidecar

As other years it was a scramble to Paris and we arrived at the registration desk with 5 min to spare (7:55pm).

Here are a few photos to give a taste of the weekend.

posted by Fastback in cool bikes,events/shows,Norton Commando,Sidecar and have Comments (3)

CVMG Paris 2013

My annual pilgrimage to Paris (Ontario that is…) for the Canadian Vintage Motorcycle Group’s annual rally.

Our camp was busted buy the keystone cops for having a “fire” when Paul tossed the wiener wrapper into the bbq… it flared for all of 35 seconds disappearing into ash on the coals, this happened just as the 1920’s cop car drove by, prompting screeching tires, headlight interrogation a hilariously absurd grilling (pun intended) regarding fire, or the absence of fire, wieners and what is or is not a fire…. not our first run in with the overly enthusiastic volunteer keepers of the peace.

Note the mileage on the Puch, before and after.

posted by Fastback in cool bikes,events/shows and have No Comments

Dead of winter – parts on order

Eight inches of snow fell in the last few days and it feels like winter! The garage is nice and cozy and Alison has kindly taken our children to her mother’s house for the weekend.  That leaves me free to waste time ordering motorcycle parts and dreaming of warm weather and children bouncing in the sidecar!

Yesterday while Paul and I were trying to master walnut shell blasting (not so good), I was looking at my Velorex 560 and realized I really should get it the proper sized rim and tire.  I had to take a look at the rim and try to figure out which is the hub I’ve got as it determines spoke length. I am ordering parts from http://www.jawamarkt.cz/en. The language is a bit odd on the website but I believe that “ribbing upward” refers to the 360 style of hub (shown below).

I am hoping that the shipping will be reasonable, but I’ve ordered some Hungarian tires too so it might be a bit heavy! I will use the same tires on the Puch as well – might as well go exotic!

360 Jawa hub

I need to rebuild the shocks and forks on the Puch, so I’ll place an order with the Austrians for parts soon. I suppose I should really look at the wheel bearings and brake shoes while I am pushing for road safety certification.

I need a rear tire for my Norton 750 Commando too and want to repair the bondo that poped out. This time I will use fiberglass to make up the difference and just use bondo for a final finish.

Dreams of BMW’s are on hold for the moment… sigh.

posted by Fastback in parts,restoration,Sidecar and have Comment (1)